Unit converter
Convert length, weight, temperature, volume, area, and speed between metric and imperial units.
Convert
Rough sheet
step-by-stepCommon conversion factors
These exact or standard values cover most everyday conversions:
| Category | Conversion |
|---|---|
| Length | 1 inch = 2.54 cm (exact); 1 mile = 1.609344 km (exact); 1 foot = 0.3048 m (exact) |
| Weight | 1 pound = 0.45359237 kg (exact); 1 ounce ≈ 28.35 g |
| Volume | 1 US gallon = 3.785 liters; 1 US fluid ounce ≈ 29.57 mL; 1 US cup ≈ 236.6 mL |
| Area | 1 acre ≈ 4,047 m²; 1 hectare = 10,000 m² ≈ 2.471 acres |
| Speed | 1 mph = 1.609 km/h; 1 knot ≈ 1.852 km/h |
Temperature formulas
- Celsius to Fahrenheit: °F = °C × 9/5 + 32
- Fahrenheit to Celsius: °C = (°F − 32) × 5/9
- Celsius to Kelvin: K = °C + 273.15
For example, 72°F is (72 − 32) × 5/9 ≈ 22.2°C, and 100°C is 212°F. The two scales meet at −40, where −40°C equals −40°F.
US versus imperial units
Some units share a name but not a size. A US gallon is about 3.785 liters, while a UK imperial gallon is about 4.546 liters, roughly 20 percent larger. The same is true of pints and fluid ounces. This converter uses US customary units, so if you are following a recipe or fuel economy figure from the UK, check which system it uses.
Quick mental estimates
- Kilometers to miles: multiply by 0.6 (100 km is about 62 miles).
- Kilograms to pounds: double it and add 10 percent (10 kg is about 22 lb).
- Celsius to Fahrenheit, roughly: double and add 30 (20°C is about 70°F; the exact value is 68°F).
- Liters to US quarts: about the same, with a liter slightly larger.
Tips for accuracy
When converting for cooking, engineering or medicine, use exact factors and round only at the end. Rounding at each step compounds errors. For medication doses, always follow the label or your pharmacist rather than relying on a conversion you did yourself.
Frequently asked questions
Length, weight, volume, area, and speed all scale by simple multiplication, but Celsius, Fahrenheit, and Kelvin have different zero points, so converting between them needs an offset as well as a scale factor.
Yes, the conversion factors used are the standard defined equivalents (for example, exactly 2.54 centimeters to an inch), so results are precise to the decimal places shown.